|
Post by martynrb5 on Jul 24, 2013 23:19:51 GMT -8
Hello, Has anyone fitted a dial from a 7s26 on to a 6309 divers watch? I would like to know if there were any issues with getting the chapter ring to line up correctly since the 7s26 dials don't have a lug on them. I know I'd have to snip the feet too. Cheers, Martyn
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 27, 2013 8:38:40 GMT -8
You'll need to remove the crystal to align the chapter ring. then place a very small dab of glue (super glue) between the chapter ring and case, allow at least 30 minutes dry time and reinstall the gasket seating ring, gasket and crystal.
Shawn
|
|
|
Post by martynrb5 on Jul 27, 2013 9:00:35 GMT -8
Thanks Shawn , much appreciated!
|
|
xzqt
Newb
Like me, like me,
Posts: 88
|
Post by xzqt on Nov 11, 2013 2:54:02 GMT -8
I think a little UV glue will work better since they dry clear. I had some bad gassing experience with super glue... even after some 1-2 hrs. Careful.
|
|