tritto
WS Benefactor
Posts: 5,872
|
Post by tritto on Feb 15, 2017 19:34:59 GMT -8
Ok, so some of you might have seen me post about this beautiful little early 70s Tissot chrono with hand-winding Lemania movement. Unfortunately the crystal is a little crazed and cracked and I can't find a replacement. I had it with a local guy recently and he said he could turn one up for me, but decided he couldn't. Not only does the chapter ring fit tightly inside the deeply stepped crystal like a tension ring, but he also tells me the outer bezel is tension fitted to the crystal too, which makes it doubly hard to turn your own. I've taken it back for the time being as I won't fork out for a service until I get an appropriate crystal solution. The 1.7mm deep step precludes just replacing the tension ring in a generic crystal with the chapter ring. He hunted several parts houses to no avail, but at least he was able to give me a part number (which neither Swatch Group Australia or in Switzerland was able to do). So, the part number is 10219 and the case number is 40526-1X. If you were hunting for an obscure Swiss crystal, where would you go? Obviously, I'm aware of Cousins, Esslinger, Jules Borel and Ofrei.Where else should I try?
|
|
Adrian-VTA
Global Moderator
Adelaide, South Australia
Posts: 5,327
|
Post by Adrian-VTA on Feb 15, 2017 22:33:19 GMT -8
Geday, Swatch in AU are totally useless. I'll text you two more people to try. Besides that, have you tried contacting Swatch in Switzerland? Ok, so some of you might have seen me post about this beautiful little early 70s Tissot chrono with hand-winding Lemania movement. Unfortunately the crystal is a little crazed and cracked and I can't find a replacement. I had it with a local guy recently and he said he could turn one up for me, but decided he couldn't. Not only does the chapter ring fit tightly inside the deeply stepped crystal like a tension ring, but he also tells me the outer bezel is tension fitted to the crystal too, which makes it doubly hard to turn your own. I've taken it back for the time being as I won't fork out for a service until I get an appropriate crystal solution. The 1.7mm deep step precludes just replacing the tension ring in a generic crystal with the chapter ring. He hunted several parts houses to no avail, but at least he was able to give me a part number (which neither Swatch Group Australia or in Switzerland was able to do). So, the part number is 10219 and the case number is 40526-1X. If you were hunting for an obscure Swiss crystal, where would you go? Obviously, I'm aware of Cousins, Esslinger, Jules Borel and Ofrei.Where else should I try?
|
|
tritto
WS Benefactor
Posts: 5,872
|
Post by tritto on Feb 16, 2017 1:10:23 GMT -8
I haven't gone direct to Swatch in Switzerland as the contact us on the Tissot website directs your query to Swatch Australia. Swatch Australia didn't want to help me last time I tried to deal with this, but I eventually persuaded them to contact some Swatch group vintage service centre in Switzerland, who also couldn't even supply me with a part number. I'm one step closer now having a part number I guess. Curiously, when I dropped the watch off it was fully wound but not running. It's now winding smoother and running. The chrono hands don't quite reset to 12 as they did so I assume he's had the movement out and the dial off, although I can't imagine it's been serviced (I told him not to service it until we'd sorted out a crystal).
|
|
|
Post by philsinclair on Feb 21, 2017 17:38:26 GMT -8
Hi mate. If might be worth checking to see if there is an Omega equivalent. Cheers Phil
|
|