Hello .This my first Post.

[houlk]

I am wondering how to fix a broken screw down (button) assortment which is a permanent part of 7t62-0eb0 watch.

It was a very big mistake for me to pull out the stuck button with a tool and the inside material broke down. I  tried to stick it with

epoxy glue but it is so little that i failed.This part consist of 4 items. 1.the Push Button (A40A24SMS0A) which is in stock not in many parts-shops 2. The empty (without head) Crown in which the button (with the corresponded small spring) is inserted before it reach the inside of the watch 3. A ring Barrel that is screwed into the crown before the button is inserted in the crown.4. a small metal part (the broken one) that is glued on the case and hold the crown not to be removed on one side and on the other side is the hole inside the case that the inserted button appears and must be hold with a c clip.Even if i fix it ,the 4th piece the crown (2nd) is also separated from the (4th) again by mistake (i put pressure on it to unstuck it) and now it is separated easily which means that the whole system would be functional as it is concern the push button action but the crown will never screw in. The worst is that the crown is a little bit curved.

I have searched web for more than 10 days and nothing helped me.

Is a chance to find a similar crown that works in the same way?

Thanks a lot

Paul

[sdoocms]

:party:

[Deleted]

Hi Paul and to Wrist Sushi!

If you post your message in the 'Service&Repair' section, you should get the responses you need. There are some very experienced and knowledgeable folks here. Many are chronograph gurus

[houlk]

THANKS A LOT FOR THE INFO

PAUL

[69ChevelleSS]

Welcome.  Enjoy the time you spend here!  Plenty of knowledge that gets freely shared!

[Groundhog66]

Welcome to Wrist Sushi, Paul!

[cd_god]