|
Post by SeikoSoMatic on Jul 28, 2020 7:08:42 GMT -8
Just received my first LM, a 5606-7360 from Sept. '75, in apparently unworn condition. It has a facetted crystal, which is cool, but the emerald-green dial did it for me. A couple of things surprised me. First, this watch has a lug width of 17mm, which I've never come across before. Secondly, this is I think the only Seiko I've ever seen with only polished surfaces, no brushing . . . makes for a "blingy" look. It came with the original bracelet and an extender, missing a spring bar. Without the extender the bracelet is of course excruciatingly short. I haven't for the life of me been able to figure out how to attach everything together, to see if maybe it would fit after all. Tried a 16mm spring bar, but maybe there's a piece missing, I don't know. If anyone has any experience with these I would appreciate some enlightenment. Oh, yes, the most important thing. The day/date quickset works!
|
|
mikeyt
Needs a Life!
Krusty Olde Pharte
Posts: 4,821
|
Post by mikeyt on Jul 28, 2020 9:29:08 GMT -8
There are sellers on that auction place that have 17mm springbars
|
|
|
Post by SeikoSoMatic on Jul 28, 2020 11:00:19 GMT -8
There are sellers on that auction place that have 17mm springbars That's not the problem. The 17mm springbars are for the lugs, I have those. Attaching the extender to the rest of the bracelet and being able to use it is my problem.
|
|
|
Post by leffemonster on Jul 28, 2020 11:49:58 GMT -8
There are sellers on that auction place that have 17mm springbars That's not the problem. The 17mm springbars are for the lugs, I have those. Attaching the extender to the rest of the bracelet and being able to use it is my problem. I think you’ll need 16mm short bead spring bars, probably 1.00mm or 1.20mm.
|
|
|
Post by SeikoSoMatic on Jul 28, 2020 12:54:57 GMT -8
That's not the problem. The 17mm springbars are for the lugs, I have those. Attaching the extender to the rest of the bracelet and being able to use it is my problem. I think you’ll need 16mm short bead spring bars, probably 1.00mm or 1.20mm. "Short bead" . . . ?
|
|
|
Post by leffemonster on Jul 28, 2020 12:57:13 GMT -8
|
|
|
Post by SeikoSoMatic on Jul 28, 2020 13:10:16 GMT -8
Thank you . . . once again! I may need another extender, I can't really get the holes to line up with this one anyway.
|
|