suntzu
Needs a Life!
Posts: 3,593
|
Post by suntzu on May 29, 2021 19:16:43 GMT -8
I have this lot of 14 bracelets that I numbered 1 through 14 (1-9 numbered on top and 10-14 on bottom). I would appreciate it if anyone can tell what reference Seiko(s) each was used for. I am curious to know if numbers 3 or 5 is for a Poor Mans 62MAS. Thanks!  |
|
|
|
Post by Senpai on May 29, 2021 22:37:37 GMT -8
The middle links for the PM62MAS should be 10mm, and rise to a peak. 18mm end links, with a slight curve. Can you post more photos in different angles? If it is correct, I would like to buy one! PM me if so.
|
|
suntzu
Needs a Life!
Posts: 3,593
|
Post by suntzu on May 30, 2021 2:56:48 GMT -8
The middle links for the PM62MAS should be 10mm, and rise to a peak. 18mm end links, with a slight curve. Can you post more photos in different angles? If it is correct, I would like to buy one! PM me if so. I need that bracelet. It’s going on my wrist! 😆 It’s in the mail so I can only go by the images I have. Here are some more.    |
|
cobrajet25
Needs a Life!
"Underweared curmudgeon!"
Posts: 3,357 
|
Post by cobrajet25 on May 30, 2021 4:53:58 GMT -8
Numbers 11 and 12 look like they are for the 6117 Navigator Timer/World Time?
|
|
cobrajet25
Needs a Life!
"Underweared curmudgeon!"
Posts: 3,357
|
Post by cobrajet25 on May 30, 2021 5:02:40 GMT -8
Number 14 may be for a 6106-822x "Rally Diver".
|
|
HiBeat
Global Moderator
SEIKO Iko Iko GDTRWS
Posts: 8,660
|
Post by HiBeat on May 30, 2021 5:33:24 GMT -8
Numbers 11 and 12 look like they are for the 6117 Navigator Timer/World Time? Yes I think so too. |
|
HiBeat
Global Moderator
SEIKO Iko Iko GDTRWS
Posts: 8,660
|
Post by HiBeat on May 30, 2021 5:35:13 GMT -8
In this photo where the end links stretch from 4 1/2" 5 1/8" inches (+/-) it goes to a BellMatic. The bracelets are the same except for the end links, which is the whole key to getting a coveted PM62MAS bracelet.
|
|
suntzu
Needs a Life!
Posts: 3,593
|
Post by suntzu on May 30, 2021 7:26:45 GMT -8
Thanks guys!
|
|
|
|
Post by Senpai on May 30, 2021 8:10:50 GMT -8
If the end links are wrong, you might be able to mount aftermarket links from seller ”seikosis” on ebay.
|
|
suntzu
Needs a Life!
Posts: 3,593
|
Post by suntzu on May 30, 2021 8:51:39 GMT -8
If the end links from Uncle Seiko fit #2 then I have a President style Pogue bracelet. I did that with my Aussie Pogue and maybe can do it with the silver dial 6139-6002 as well.
I’m curious to know what the beads of rice went on
|
|
suntzu
Needs a Life!
Posts: 3,593
|
Post by suntzu on May 30, 2021 12:10:47 GMT -8
Numbers 11 and 12 look like they are for the 6117 Navigator Timer/World Time? Yes, it appears to be. Number 14 may be for a 6106-822x "Rally Diver". Also, appears to be as well as #3 and #5.
I'm researching vintage Seiko bracelets and figuring some out. Really would like to know what those beads of rice go on. Beads of rice bracelets seem to command a premium. I intend to sell off most of these.
|
|
suntzu
Needs a Life!
Posts: 3,593
|
Post by suntzu on May 30, 2021 13:16:34 GMT -8
#4 is for a 6138-3000.
A little short but good for links and end links
|
|
HiBeat
Global Moderator
SEIKO Iko Iko GDTRWS
Posts: 8,660
|
Post by HiBeat on May 30, 2021 14:38:05 GMT -8
#4 is for a 6138-3000.
A little short but good for links and end links
I was thinking 6119-6020/-6023 but trust your judgement. |
|
suntzu
Needs a Life!
Posts: 3,593
|
Post by suntzu on May 30, 2021 16:17:57 GMT -8
#4 is for a 6138-3000.
A little short but good for links and end links
I was thinking 6119-6020/-6023 but trust your judgement. You can be right too. Here is the 6138. It has that "T" end link and same link pattern.
|
|
|
|
Post by SeikoPsycho on May 31, 2021 5:22:03 GMT -8
#3 is correct for a poor man's 62mas bracelet but the end links are incorrect.
The center links are actually 11mm
|
|
|
|
Post by SeikoPsycho on May 31, 2021 16:43:26 GMT -8
Here is what the correct end link looks like:
|
|
HiBeat
Global Moderator
SEIKO Iko Iko GDTRWS
Posts: 8,660
|
Post by HiBeat on May 31, 2021 19:03:52 GMT -8
#3 is correct for a poor man's 62mas bracelet but the end links are incorrect.
The center links are actually 11mm
BellMatic most likely |
|
|
|
Post by Senpai on Jun 1, 2021 23:30:29 GMT -8
Here is what the correct end link looks like:
This is very useful info, I have been looking for this bracelet for a long time. Are there any markings on the end links or clasp? Clasp is 16mm, 6 hole «SEIKO»? |
|
suntzu
Needs a Life!
Posts: 3,593
|
Post by suntzu on Jun 2, 2021 16:27:58 GMT -8
The bracelets are identical with 12mm end link openings but end links are not for a PM 62MAS like SeikoPsycho said. Would love to get a pair if anyone has!!  |
|
tritto
WS Benefactor
Posts: 5,869
|
Post by tritto on Jun 2, 2021 16:59:47 GMT -8
There are a few 7005, 7006, and even a 6308, dressier models that used the same bracelet as the PM62MAS. However, none of them use the same end links as the PM62MAS.
The earlier PM62MAS bracelets have a pin system for the removable links that is prone to wear and falling apart. I believe this is the reason so many come without the bracelet.
The later bracelets have a different shaped pin system that is more robust.
If you can find PM62MAS end links, bracelets 3 and 5 have value. If not, they only really have value to people with a spare set of end links.
|
|
