|
|
Post by catkicker on Nov 14, 2013 4:50:37 GMT -8
Need some help from fellow 6309-7049 owners. I would like to put a Seiko SS bracelet, oyster or jubilee.
Most of the bracelet I'm seeing have the curved end which will not work. I need a bracelet with straight ends.
Any suggestions or help would be appreciated.
|
|
sdoocms
Is a Permanent Fixture
Carl
Posts: 5,296 
|
Post by sdoocms on Nov 14, 2013 6:22:09 GMT -8
You might want to look at tungchoy.com. They have a variety of 22mm bracelets, straps, and bands.
|
|
|
|
Post by 69ChevelleSS on Nov 14, 2013 7:01:23 GMT -8
I also think Jonathan (swedefreak) has end links but you can find out for sure by PM'ing him. His products are of excellent quality!
|
|
|
|
Post by Groundhog66 on Nov 14, 2013 7:02:37 GMT -8
Curved end links will not work?
|
|
mikeyt
Needs a Life!
Krusty Olde Pharte
Posts: 4,821
|
Post by mikeyt on Nov 14, 2013 16:33:55 GMT -8
Curved end links will not work? Curved end links will work, but not the ones that fit the 729x, 7002 and SKX cases. |
|
|
|
Post by Groundhog66 on Nov 14, 2013 16:55:28 GMT -8
Curved end links will not work? Curved end links will work, but not the ones that fit the 729x, 7002 and SKX cases. That's why I'm wondering why the OP, is stating he needs straight ends. |
|
|
|
Post by catkicker on Nov 14, 2013 17:24:24 GMT -8
Looks like you need straight ends. I don't know for sure what I needed, that is why I asked for help on this.
|
|
|
|
Post by C4L18R3 on Nov 14, 2013 17:37:17 GMT -8
Looks like you need straight ends. I don't know for sure what I needed, that is why I asked for help on this. Hi, could you please clarify so we can help. Do you want straight ends because it's what you prefer? Or do you like them because you think curved ends won't work? Which one then? If it's the 1st one then there are so many choices available on 22mm straight end bracelets. If it's the 2nd one then you're mistaken - there are many 6309-7049 specific bracelets out there. |
|
cobrajet25
Needs a Life!
"Underweared curmudgeon!"
Posts: 3,357
|
Post by cobrajet25 on Nov 15, 2013 23:07:26 GMT -8
If this is the look you are going for then you need a standard Seiko 22mm president bracelet (made for an SKX-type Seiko diver) and a set of 6309-specific endpieces. You will not be using the endpieces that came with the bracelet. I highly recommend Jonathan's endpieces. IIRC he sells them with different center widths to accommodate different bracelets. This one has a 9mm center link.  I think straight-end bracelets look terrible on divers, but that is just me. |
|
|
|
Post by seikomatic on Nov 18, 2013 22:02:03 GMT -8
|
|
