FS: Aftermarket stem gear for 61xx internal rotating USD25
Feb 9, 2024 0:58:39 GMT -8
via Tapatalk
thehobbyhorologist and autimage like this
Post by appumaster on Feb 9, 2024 0:58:39 GMT -8
Aftermarket new uncut stem and gear with crown (50M04NS) for the Seiko Pogue 6139 as well as other 6106, 6117, 6119 and 6139 models with internal rotating bezels.
This is a fixed gear design and is not the same as the OEM Seiko ones where the gear is supported with the pressure of a spring allowing it to move back and forth.
The gear is locked onto the stem with regular Loctite threadlocker (or superglue) at the required position which varies depending on the watch.
The gear has a beveled slope at the front edge of the teeth unlike the razor sharp edged cheap brass version.
This is the EXACT same one sold online with a dummy spring setup between the gear and crown! DO NOT be duped by that, you should know what you're buying!
Priced at a very reasonable USD25 per piece.
Tracked & Registered shipping additional at USD7 per package.
Payment via PayPal.
Edit: As the gear is fixed in place, it will still wear the plastic teeth of the internal bezel at some point so use at your own discretion.
This is a fixed gear design and is not the same as the OEM Seiko ones where the gear is supported with the pressure of a spring allowing it to move back and forth.
The gear is locked onto the stem with regular Loctite threadlocker (or superglue) at the required position which varies depending on the watch.
The gear has a beveled slope at the front edge of the teeth unlike the razor sharp edged cheap brass version.
This is the EXACT same one sold online with a dummy spring setup between the gear and crown! DO NOT be duped by that, you should know what you're buying!
Priced at a very reasonable USD25 per piece.
Tracked & Registered shipping additional at USD7 per package.
Payment via PayPal.
Edit: As the gear is fixed in place, it will still wear the plastic teeth of the internal bezel at some point so use at your own discretion.