|
|
Post by doomguy10011 on Jul 8, 2015 21:45:18 GMT -8
Picked up this excellent BoR from a member here recently and it fits pretty decently on my KS. I need to remove about three links and I'm having a bit of trouble going about it. Any help would be greatly appreciated. Thanks in advance!   |
|
cobrajet25
Needs a Life!
"Underweared curmudgeon!"
Posts: 3,360 
|
Post by cobrajet25 on Jul 9, 2015 0:27:09 GMT -8
These use short springbars between the links for size adjustment. If you look at the ends of some of the links, you will see they have a hole in them.
Put a toothpick or something into the hole to disengage the springbar on that side. Repeat for the other side. These are a little fiddly because the end of the springbar wants to re-engage if not held.
Often, the springbar will be severely worn or damaged when it comes out, and will require replacement.
|
|
|
|
Post by doomguy10011 on Jul 9, 2015 2:03:32 GMT -8
These use short springbars between the links for size adjustment. If you look at the ends of some of the links, you will see they have a hole in them. Put a toothpick or something into the hole to disengage the springbar on that side. Repeat for the other side. These are a little fiddly because the end of the springbar wants to re-engage if not held. Often, the springbar will be severely worn or damaged when it comes out, and will require replacement. Thank you very much! I now have it fitting comfortably. As you said, one of the springbars was damaged, but the other is still holding up nicely. Removed two links and it's good to go after some cleaning.  |
|
cobrajet25
Needs a Life!
"Underweared curmudgeon!"
Posts: 3,360
|
Post by cobrajet25 on Jul 9, 2015 4:31:33 GMT -8
Glad to help. Looks great!  |
|
