|
Post by seikoholic on Oct 23, 2015 12:07:02 GMT -8
I bought a parts lot. It was almost entirely garbage. Well, when I opened the box it seemed to be 100% garbage actually. The seller had taken a bunch of watches and watch parts including balances and dials and just dumped all of it loose into a small flat-rate box. If it hadn't been junk before, most of it was now. But I found one thing. The person had clearly scavenged everything good they could from this lot, and I was dumb enough to hope for a treasure, but they had missed something. Underneath the padding of a metal dial box I found a still-folded paper that contained three sets of hands - hour, minute, second - for an unknown model. - Unlumed, black stripe hands
- Hands same dimension as 6139-600x hands
I associate this type of hand with JDM watches - dress models, bell-matics etc. Anyone have a clue what these might go to?
|
|
HiBeat
Global Moderator
SEIKO Iko Iko GDTRWS
Posts: 8,684
|
Post by HiBeat on Oct 23, 2015 12:55:24 GMT -8
I believe Stefan was urgently seeking these hands a while back.
|
|
Adrian-VTA
Global Moderator
Adelaide, South Australia
Posts: 5,327
|
Post by Adrian-VTA on Oct 23, 2015 15:33:44 GMT -8
Almost certain those hands are for 7006/7009/6309 semi-dress watches. They are slightly more rounded than the bell-matic hands and the bell-matic black stripe hands are lumed.
They are more rounded around the boss as well, which usually means a 7006/7009.
|
|
iwaddell
Timekeeper
Between the devil and the deep blue sea.
Posts: 758
|
Post by iwaddell on Oct 24, 2015 8:08:43 GMT -8
The minute and hour hands are like a non-lumed versions of the hands on my dads ole 7019-7110 Seiko 5. Does'nt realy help narrow down the actual watch, but could bring it to be from Seiko 5's
|
|
|
Post by seikoholic on Oct 24, 2015 8:39:25 GMT -8
Almost certain those hands are for 7006/7009/6309 semi-dress watches. They are slightly more rounded than the bell-matic hands and the bell-matic black stripe hands are lumed. They are more rounded around the boss as well, which usually means a 7006/7009. I owned an early JDM bell-matic, a 27j one, and it had non-lumed black stripe hands similar to this. I need to find photographs in my stuff. I've also seen similar sets on the Lord Marvel watches. I'm pretty sure they're JDM hands
|
|
|
Post by Benchdweller on Oct 24, 2015 16:48:05 GMT -8
JDM you say...
|
|
|
Post by seikoholic on Oct 24, 2015 20:06:52 GMT -8
Yup, non-lumed black-stripe hands, but shorter than 6138 hands.
|
|