|
Post by seikoholic on Nov 9, 2014 17:55:05 GMT -8
I got a bunch of new (old) Seiko magazine ads. Bought this one for the 7A's. I swear seeing this stuff helps me see what these watches were when they were new - expensive and cool. I'll be scanning and posting up the original material I've got, but now I'm sad that I've sold every moonphase I've ever owned. Never had one of the 7A38s shown, only the gold / stainless version. On a side note, I've started thinking that these ads were produced using sample watches, not actual runners. For the most part. I mean, in order for them to have the watches stopped exactly where Seiko likes to stop their watches they'd either need to run down to the exact time (to the second) required, or if quartz have the crown pulled to hack the movement. But if you used sample watches, you wouldn't have to worry about that. But I've also noticed that sometimes in a Seiko ad a watch or two will actually show a slightly different time. Look below. The 38 & 48 are both stopped perfectly, in the same position as a sample watch. But the 7A28-702x has run on a bit. I think that's a living watch. Interesting stuff. I noticed it in my "robots" DX ad too that I put up the other day. One of the four is running, clearly. Three have their hands in "sample" position. Anyway, what's your favorite Seiko (or other) watch ad?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 9, 2014 18:50:20 GMT -8
Excellent reference materials! I have this one incoming from Thian... It will need some attention to get it running. Any advice as to what needs to be done? I'm assuming that due to it's age, it probably needs a good cleaning and service.
|
|
|
Post by saul on Nov 9, 2014 19:06:02 GMT -8
I got a bunch of new (old) Seiko magazine ads. Bought this one for the 7A's. I swear seeing this stuff helps me see what these watches were when they were new - expensive and cool. Were they expensive?
|
|
|
Post by seikoholic on Nov 9, 2014 19:31:12 GMT -8
I got a bunch of new (old) Seiko magazine ads. Bought this one for the 7A's. I swear seeing this stuff helps me see what these watches were when they were new - expensive and cool. Were they expensive? The watches? Back in the day? I'd say so. The ads? They were incredibly cheap.
|
|
|
Post by seikoholic on Nov 9, 2014 19:33:17 GMT -8
Excellent reference materials! I have this one incoming from Thian... It will need some attention to get it running. Any advice as to what needs to be done? I'm assuming that due to it's age, it probably needs a good cleaning and service. Are you sure it doesn't run now? Seiko had two levels of service on these. One was simply pulling the dial / hands and oiling all the pivots on the movement, front and back. This often cures many problems but these movements are decades old now and benefit from a true full servicing, but that can be a real exercise in nit-picking concentration. Very exacting work to do correctly.
|
|
cd_god
Is a Permanent Fixture
Finna set up a HOOD next door to your richie phuk suburban mansion
Posts: 12,278
Member is Online
|
Post by cd_god on Nov 9, 2014 19:33:21 GMT -8
If you have a used book store in your area most sell back issues of magazines for 25ยข and you can look through them to see what ads you want and sell the rest on Ebay or recycle the rest (I was going to say throw in the trash but see how I care
|
|
|
Post by 69ChevelleSS on Nov 10, 2014 6:13:49 GMT -8
Neat ad Spencer. I really need to get an original bracelet for my 7A28-7029!
As for how expensive these were back in the day, I don't think they were that bad. My parents bought me two . . . the 7049 when I was in college and the gold 7029 as my college graduation present. They knew I would be tough on any watch they gave me so I can't see them spending a lot on a watch they thought would get beaten to within an inch of its life. Good thing Seikos are made like they are! I guess Seiko showed them as I still have both and they work like champs!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Nov 10, 2014 7:42:47 GMT -8
Excellent reference materials! I have this one incoming from Thian... It will need some attention to get it running. Any advice as to what needs to be done? I'm assuming that due to it's age, it probably needs a good cleaning and service. Are you sure it doesn't run now? Seiko had two levels of service on these. One was simply pulling the dial / hands and oiling all the pivots on the movement, front and back. This often cures many problems but these movements are decades old now and benefit from a true full servicing, but that can be a real exercise in nit-picking concentration. Very exacting work to do correctly. I'll try the first option. If that doesn't work, I may send it to someone else to deal with
|
|