|
|
Post by bklake on Nov 19, 2015 6:02:37 GMT -8
Should the SKX bezel insert be flat? I bought one on ebay and it has a pronounced convex shape. Wondering if I was sent the wrong one. It also seems a little bit loose in both an SKX bezel and 6309 bezel.
Thanks.
|
|
Adrian-VTA
Global Moderator
Adelaide, South Australia
Posts: 5,327 
|
Post by Adrian-VTA on Nov 19, 2015 6:03:53 GMT -8
Should be flat. Convex shape shouldn't be a huge issue, it should mean as you press it in, it flattens and butts right up on the ridges so you don't need glue (glue = bad). Should the SKX bezel insert be flat? I bought one on ebay and it has a pronounced convex shape. Wondering if I was sent the wrong one. It also seems a little bit loose in both an SKX bezel and 6309 bezel. Thanks. |
|
|
|
Post by bklake on Nov 19, 2015 6:24:23 GMT -8
I guess it's a feature not a flaw. I'll press it flat and see if it tightens up. I'm not too sure how this aluminum will respond.
|
|
Adrian-VTA
Global Moderator
Adelaide, South Australia
Posts: 5,327
|
Post by Adrian-VTA on Nov 19, 2015 7:05:26 GMT -8
Should squish nicely if it's pretty close to the right size. I guess it's a feature not a flaw. I'll press it flat and see if it tightens up. I'm not too sure how this aluminum will respond. |
|
